Kingston upon Thames · South London
Wraparound extensionin New Malden.
A wraparound extension is best treated as one coordinated redesign, not as a side and rear project joined together at the end. The key decision is how the combined footprint changes the whole ground floor plan, from circulation and cooking to light and garden connection.

- Service
- Wraparound extension
- Neighbourhood
- New Malden
- Borough
- Kingston upon Thames
- Next step
- Discuss your project
Your project brief
Judge the combined footprint against the way the home should function
One route is to use the wraparound to create one open, practical family space with clear zones for cooking, dining and relaxing. That can work well if the existing rooms are too separated and the owner wants a single layout that supports everyday life.
Another route is to keep some separation, for example by using part of the new space for a utility or snug. That can suit households that want flexibility rather than one very large room, especially when privacy, noise control or storage are important.
What Kingston guidance means for a wraparound project in New Malden
Kingston upon Thames asks homeowners to consider its development plan, Residential Design SPD and wider planning policy before submitting. For a New Malden address, the exact property must still be checked for conservation area status, listed building controls, Article 4 directions or protected trees. Those factors can affect the route and the design, so borough-level information is only the starting point.
Design decisions
Plan the structural junctions and light strategy together
The survey must compare the combined side and rear footprint with the garden retained, then test how daylight reaches the centre of the original house. Without that, the design may look generous on plan but feel gloomy once built.
It also needs to coordinate structural openings, the junction between roof elements and the planning route for the full scheme. A wraparound should be assessed as one proposal, because assumptions based on two separate additions can lead to a design that is not properly buildable or properly assessed.
Design checks
Four things we confirm before drawing a wraparound extension.
- 01Compare the combined footprint with the garden left after building.
- 02Plan daylight to the centre of the original house from the outset.
- 03Coordinate structural openings and roof junctions together.
- 04Check the planning route for the whole scheme, not in pieces.
Questions
Before you call about New Malden.
Why should a wraparound be judged as one scheme?
Because the side and rear parts affect each other. The structure, daylight, garden balance and planning route all depend on the combined footprint, so treating them separately can hide problems that only appear when the whole plan is considered.
What is the main practical risk with a large open-plan wraparound?
Poor light and awkward circulation if the centre of the house is not planned carefully. A generous footprint still needs zoning, openings and structure that make the room comfortable and easy to use every day.
Can a wraparound still include separate spaces?
Yes. A good scheme does not have to be fully open plan. It can include a utility, study corner or snug if that improves how the household uses the space and the design still works structurally.
Planning and project guidance
- Planning policy and guidance | Royal Borough of Kingston upon Thames
- GOV.UK · Planning permission
- GOV.UK · Building regulations approval
- GOV.UK · Party walls and building work
Check the current guidance for your address before relying on a planning route. This guide is not a planning decision or a verified local case study.
Other services in New Malden








