Bromley · South London
Doorsin Orpington.
A door replacement is easiest to get right when the opening, the frame and the surrounding finishes are checked together. The best decision is not always a new door from scratch; sometimes the existing frame can stay if it still suits the opening and use.

- Service
- Doors
- Neighbourhood
- Orpington
- Borough
- Bromley
- Next step
- Discuss your project
Your project brief
Decide whether the existing frame can stay
Retaining the frame can save unnecessary work, but only if it is sound and fits the new door properly. That means checking whether the opening is square enough, whether the lining is serviceable and whether the surrounding finishes can be kept without awkward patching.
If the opening is being altered, the scope should say so clearly. A simple door swap and an altered opening are different jobs, because the latter affects structure, plastering, trims and sometimes hardware choices as well.
Check the exact address if the door work forms part of a wider external change
Bromley’s conservation-area map and guidance are relevant if a door replacement at an Orpington property is part of a larger external alteration. But the address must be checked, because council-wide information does not automatically tell you what applies to a specific house. That matters especially if the property is listed or locally listed, where separate checks may be needed.
Design decisions
Match the hardware to the door’s purpose
Handles, hinges, latches and closers should suit the way the door will be used. A bedroom door, a utility room door and an external door all raise different practical questions, so the hardware should be chosen for the function, not only the appearance.
It is also sensible to consider clearance and nearby finishes early. If a door is too tight against flooring or trim, the final fit can feel poor even if the door itself is good. The brief should therefore include the adjoining surfaces, not just the leaf and frame.
Design checks
Four things we confirm before drawing door installation.
- 01Check whether the existing frame is sound enough to retain.
- 02State clearly if the opening itself will be altered.
- 03Choose hardware for the door’s function and use.
- 04Include clearance, trim and adjoining finishes in the scope.
When should a frame be kept rather than replaced?
When it is sound, suitable for the new door and not causing fit or finish problems. If it is warped or badly damaged, keeping it may lead to more issues than it solves.
Why does the surrounding finish matter for a new door?
Because a good door can still look wrong if the trims, flooring or plaster edges do not meet it properly. The opening needs to work as a whole, not as separate parts.
Are internal and external door decisions the same?
No. Internal doors are mostly about fit, use and appearance, while external doors also involve weather performance and additional installation requirements. The scope should reflect that difference.
Planning and project guidance
- Conservation areas
- GOV.UK · Planning permission
- GOV.UK · Building regulations approval
- GOV.UK · Party walls and building work
Check the current guidance for your address before relying on a planning route. This guide is not a planning decision or a verified local case study.
Other services in Orpington







