Ealing · West London
Wraparound extensionin Hanwell.
A wraparound extension has to work as a single piece of design, even though it reaches in two directions. The main challenge is deciding how much garden to keep, how to preserve useful access and how the new layout will improve the ground floor as a whole.

- Service
- Wraparound extension
- Neighbourhood
- Hanwell
- Borough
- Ealing
- Next step
- Discuss your project
Your project brief
Balance footprint and retained garden use
The combined side and rear shape should be tested against the amount of garden you want to keep, not just against the internal floor gain. A design that spreads too far may solve one room problem but create a poor relationship with the outside space or the boundary.
It is also worth mapping what the existing house already does well. If there is a clear route from the hall to the garden or a storage area that still serves the home, the wraparound should protect that advantage where possible rather than erasing it for the sake of a larger footprint.
Hanwell local checks
For a Hanwell wraparound proposal, check the exact site against Ealing’s planning and conservation-area information before settling the footprint. The council notes that some conservation areas have extra restrictions and that Article 4 directions apply in certain places. That does not confirm your home is affected, so address-specific checking is essential. The planning route should be established for the combined scheme, not assumed from the side and rear parts separately.
Design decisions
Use one plan for structure, daylight and the roof junctions
Because the scheme turns a corner, the structural openings and roof elements need to be coordinated from the start. That helps avoid a pair of separate additions that do not meet cleanly or leave the centre of the house dark and difficult to use.
A useful design conversation should include where daylight is needed in the original house, where glazing will be most effective and how the new walls affect circulation. If the scheme includes a kitchen or family area, the layout should support daily movement, storage and garden access, not just give a bigger rectangle.
Design checks
Four things we confirm before drawing a wraparound extension.
- 01Compare the combined side and rear footprint with the garden retained.
- 02Plan daylight to the centre of the original house.
- 03Coordinate structural openings and the junction between roof elements.
- 04Check the planning route for the combined scheme rather than assuming two separate allowances apply.
Questions
Before you call about Hanwell.
Why should a wraparound be treated as one proposal instead of two extensions?
Because the side and rear parts affect each other structurally, visually and in planning terms. Designing them together gives a clearer answer on garden retention, daylight and circulation than assessing each piece separately.
What should be retained if I want the extension to feel practical?
Keep the routes that make the house usable: movement from front to back, access to the garden and any storage that still serves a purpose. Those elements often matter more than squeezing out a few extra square metres.
What can go wrong if the centre of the house is ignored?
It can end up feeling dark or awkward to furnish. A good wraparound strategy considers how light reaches the original rooms and how people will move through the enlarged ground floor every day.
Planning and project guidance
- Management within conservation areas | About conservation areas | Ealing Council
- GOV.UK · Planning permission
- GOV.UK · Building regulations approval
- GOV.UK · Party walls and building work
Check the current guidance for your address before relying on a planning route. This guide is not a planning decision or a verified local case study.
Other services in Hanwell








