Kent · Sevenoaks · Town service guide
Doorsin Sevenoaks.
A door only works properly when the opening, frame and purpose all suit each other. The main decision is whether the existing frame can stay or needs changing, because that affects fit, weathering, hardware and the finished look of the room or frontage.

- Service
- Doors
- Town / city
- Sevenoaks
- County
- Kent
- Next step
- Discuss your project
Your project brief
Measure the opening, not just the leaf
Replacing a door by size alone can miss the reality of an out-of-square frame, uneven floor or changed threshold. The survey should check the full opening so the new door fits properly and swings as intended. That matters even more where the room has been altered and the original frame is no longer square or level.
If the frame is serviceable, keeping it can save unnecessary making good. If it is damaged, poorly aligned or incompatible with the new door, replacing the frame may be the better choice. The finished result depends on the opening working as a system, not on the leaf alone.
Sevenoaks checks before changing a door opening
Sevenoaks District Council’s conservation directory says the map attached to the relevant entry should be used for current boundaries and that open spaces, trees and historic street patterns may contribute to character. A Sevenoaks address alone does not establish conservation status or a planning route. If a door change affects the exterior, the exact property must be checked before the opening, proportions or materials are fixed.
Design decisions
Match the door to the role it must play
An internal door, external entrance door and fire door all have different requirements. A fire door is not just a standard leaf with a label; the frame, seals, closer and hardware all need to suit the intended use. The survey should therefore define purpose before ordering parts.
For external or altered openings, weathering, security and any structural implications also need to be considered. That makes door work a design decision as much as a joinery one, because the smallest change in the opening can affect both performance and the final finish around it.
Design checks
Four things we confirm before drawing door installation.
- 01Internal door replacement and fitting within an agreed joinery scope.
- 02Frames, linings, architraves and associated making-good where specified.
- 03Handles, hinges, latches and other hardware matched to the door’s intended use.
- 04External door or altered-opening enquiries assessed with the relevant installation requirements.
Should I keep the existing frame when replacing a door?
Only if the frame is sound, square enough and suitable for the new leaf and hardware. If the frame is out of line or damaged, retaining it can create fitting problems and a poor finish, so the survey needs to judge the opening as a whole.
What makes a fire door different from a standard internal door?
A fire door depends on the entire assembly, not just the leaf. The frame, seals, closer and hardware all need to suit the specification, and the door must be installed to match its intended fire performance and use.
When does a door change become a bigger building job?
If the opening must be enlarged, structurally altered or externally changed, the work can involve approvals and additional building tasks. That is why the survey should establish the opening, the purpose and the required performance before ordering anything.
Planning and project guidance
- Sevenoaks District Council · conservation directory and design guidance
- GOV.UK · Planning permission
- GOV.UK · Building regulations approval
- GOV.UK · Party walls and building work
Check the current guidance for your address before relying on a planning route. This guide is not a planning decision or a verified local case study.
Other services in Sevenoaks







