Westminster · Central London
Plasteringin Paddington.
Good plastering starts with the surface behind the finish, not with the smooth coat you see at the end. The choice between patch repair, boarding or a fuller re-plaster depends on whether the background is stable enough to hold the finish you want.

- Service
- Plastering
- Neighbourhood
- Paddington
- Borough
- Westminster
- Next step
- Discuss your project
Your project brief
Read the wall before choosing the plaster system
Drawings will not tell you if a wall is powdery, cracked, badly patched or out of plane. A survey should look at the existing background, previous repairs and any new work nearby, such as openings, rewiring or pipe changes. That tells you whether the wall needs a local repair or a more complete rebuild of the surface.
Write the assumptions into the scope. Say which walls are to be retained, which need preparation, and whether hidden defects are to be treated as separate work if they appear after opening up. That keeps the plastering brief tied to the condition of the room, not just the appearance of the wall.
Westminster checks before plastering forms part of a wider application
Westminster’s householder guidance shows that plans and drawings are expected with an application, and photographs are recommended to explain the proposal. If the work forms part of a listed building or a property in a conservation area, extra heritage-related information may be needed. That does not mean every Paddington address carries the same requirement; the exact property has to be checked against the council evidence.
Design decisions
Consider what sits above, below and around the finish
Plastering can affect the rooms behind or below if the work follows structural changes, new services or altered openings. A new ceiling line may need better support, and an adjusted wall thickness can change door reveals, skirting junctions or acoustic performance in adjoining spaces.
Assess that impact by checking the existing substrate, the thickness available for the finish and how the work joins to surrounding surfaces. If the room below is sensitive to noise or cracking, the backing and sequence of work matter as much as the top coat itself.
Design checks
Four things we confirm before drawing plastering work.
- 01Record wall and ceiling defects before any finish is chosen.
- 02Separate plaster repairs from structural, plumbing or electrical alterations.
- 03Confirm whether boarding, base-coat work or a skim finish is actually suitable.
- 04Note junctions, reveals and making-good areas in the written scope before starting.
Questions
Before you call about Paddington.
What does a plastering survey need to show before a finish is chosen?
It should show the condition of the background, any movement or cracking, and whether previous repairs are still sound. Without that, it is hard to know whether a skim will work or whether the wall needs more substantial preparation.
How do I keep plastering and later decoration separate in the scope?
State that plastering finishes the surface to an agreed standard, while decorating is a separate stage that follows drying and preparation. That avoids confusion about who is responsible for filling, sanding or final appearance checks.
Why might plastering affect rooms beyond the one being finished?
Because changes to wall thickness, ceiling lines or structural openings can influence adjoining rooms, including how trim, doors and ceilings meet. The effect may be small, but it should still be checked so the final finish ties through cleanly.
Planning and project guidance
- Householder application | Westminster City Council
- GOV.UK · Planning permission
- GOV.UK · Building regulations approval
- GOV.UK · Party walls and building work
Check the current guidance for your address before relying on a planning route. This guide is not a planning decision or a verified local case study.
Other services in Paddington







