Westminster · Central London
Wraparound extensionin Pimlico.
A wraparound extension gives the chance to rethink the whole ground floor, but only if the side and rear elements are designed together. The main decision is how the new space will move, light and connect, not simply how much footprint can be added.

- Service
- Wraparound extension
- Neighbourhood
- Pimlico
- Borough
- Westminster
- Next step
- Discuss your project
Your project brief
Design the internal sequence before setting the footprint
Because the scheme combines two directions, the plan should start with how people move through the house. The new kitchen, dining and family areas need a clear sequence, otherwise the extension can create large but awkward spaces. The stair, doors and openings in the original house should all be considered at the same time.
If you want an open-plan room, for example, the position of the new openings may matter more than the total size of the addition. A survey should test where structural supports can go without blocking circulation or leaving the centre of the plan too dark.
Westminster checks for combined additions
Westminster’s householder guidance covers single-house alterations and says documents such as plans, photographs and sometimes extra statements may be needed. For Pimlico, the exact property must be checked because local planning requirements depend on the address, not just the borough. If the works involve a basement or a site with flood-risk issues, Westminster’s flood-related information may also become relevant.
Design decisions
Coordinate light, structure and retained garden space
A wraparound can easily reduce daylight to the middle of the original house if the openings are not planned carefully. Drawings should therefore show light paths, roof edges and the junction between the side and rear elements. The same set of plans should also show how much garden remains and how the new walls meet it.
Write the scope so it states whether the scheme is one combined proposal, what parts depend on structural calculations and which assumptions have been made about foundations, drainage and roof junctions. That avoids treating two joined additions as if they were separate small works.
Design checks
Four things we confirm before drawing a wraparound extension.
- 01Compare the combined footprint with the amount of garden you want to keep.
- 02Plan daylight to the centre of the original house before fixing the shape.
- 03Show the structural openings and roof junctions on one coordinated drawing set.
- 04Record every assumption about foundations, drainage and retained access in writing.
Questions
Before you call about Pimlico.
Why not design the side and rear parts separately?
Because they influence each other. The side element can change the daylight, structure and circulation of the rear element, and the rear element can affect how the side space is used. A single coordinated design usually avoids conflicts later.
What can a survey reveal that a plan cannot?
It can reveal the exact positions of hidden services, the real thickness of walls and where structure can or cannot be altered. Those findings are essential when a proposal depends on opening up the centre of the house.
How should the scope describe uncertainty?
It should separate what is measured from what is assumed. Name the known dimensions, then list the items that depend on opening-up or engineer confirmation, such as foundation assumptions and structural support positions.
Planning and project guidance
- Householder application | Westminster City Council
- GOV.UK · Planning permission
- GOV.UK · Building regulations approval
- GOV.UK · Party walls and building work
Check the current guidance for your address before relying on a planning route. This guide is not a planning decision or a verified local case study.
Other services in Pimlico








