Surrey · Farnham · Town service guide
Doorsin Farnham.
A door is only as good as the opening it sits in. In Farnham, the useful decisions are about frame condition, floor levels, weathering and the job the door has to do, whether that is a simple internal replacement or work within a larger alteration.

- Service
- Doors
- Town / city
- Farnham
- County
- Surrey
- Next step
- Discuss your project
Your project brief
Check the opening before ordering the door
Measuring the old leaf alone can miss a frame that is out of square or a floor that has changed level over time. The opening should be checked as a whole so the new door, frame and trims can be set up to suit the real dimensions, not just the nominal size.
If the home is being refurbished for family use, the door choice may also need to support flexibility and daily movement. A restrained approach can be best here: the right leaf, hinges, hardware and clearances can improve the room without forcing bigger structural change than the opening really needs.
Farnham checks before door work starts
Farnham falls within Waverley’s planning area, so the exact address should be checked on the current council mapping if the door work forms part of a larger external alteration. Waverley’s guidance register includes the Farnham Conservation Area Appraisal and boundary, adopted on 22 February 2005, which gives heritage context but does not prove that every property in the town is affected. For door replacement or altered openings, the address-specific record and current guidance documents should be reviewed together before the specification is fixed.
Design decisions
Match the specification to the door’s purpose
An internal door, an external door and a fire-performance door are not interchangeable. Security, weathering, smoke control and closers or seals all affect the specification, so the job should be described clearly before the door is ordered or fitted.
If the opening is being altered, structural work and any relevant approvals may be needed as part of the wider project. That is why the door should be treated as part of the building, not just as a decorative item at the end of the job.
Design checks
Four things we confirm before drawing door installation.
- 01Internal door replacement and fitting within an agreed joinery scope.
- 02Frames, linings, architraves and associated making-good where specified.
- 03Hardware matched to the door’s intended use and performance needs.
- 04External door or altered-opening enquiries assessed with the relevant requirements.
Why measure the frame as well as the door leaf?
Because the frame may be out of square or the floor may have altered level. Those factors affect how the new door will hang, close and finish against the surrounding trims.
Can an existing frame always be kept?
Not always. It depends on its condition, the required performance and whether the new door can be hung properly within it. The frame should be assessed before that choice is made.
What changes if the door is for an altered opening?
The door becomes part of a wider building decision. Structural work, clearances and any relevant approvals may all need to be considered, not just the leaf and hardware.
Planning and project guidance
- Waverley Borough Council · Farnham appraisal and adopted planning guidance
- GOV.UK · Planning permission
- GOV.UK · Building regulations approval
- GOV.UK · Party walls and building work
Check the current guidance for your address before relying on a planning route. This guide is not a planning decision or a verified local case study.
Other services in Farnham







