City of London · Central London
Doorsin Barbican.
A door works only when it suits the opening around it. The important choices are whether the frame can stay, how the new leaf will clear the floor and finishes, and whether the door needs hardware or performance features for its use.

- Service
- Doors
- Neighbourhood
- Barbican
- Borough
- City of London
- Next step
- Discuss your project
Your project brief
Decide whether to keep the existing frame
Retaining the frame can make sense when the opening is sound and the new door will fit properly. That choice can reduce making good and keep the surrounding finishes more intact. But it should be based on the actual condition of the lining, not simply on a desire to avoid extra work.
If the frame is out of square, damaged or unsuitable for the new door, keeping it can create a poor fit and awkward operation. The right decision is usually the one that gives the most reliable opening and the cleanest finish over time, rather than the one that appears quickest at first glance.
Barbican checks before door work is ordered
The City of London’s conservation-area information, including Barbican and Golden Lane documents, may matter if the door work affects the external appearance or forms part of wider alterations. But the area name alone does not prove the same rule applies everywhere. The exact property and the nature of the door change should be checked before anything is ordered.
Design decisions
Check clearances, hardware and any performance requirements
Door fitting involves more than hanging the leaf. Handles, hinges, latches and other hardware need to suit the door’s intended use, and the clearances around the opening need to work with the adjoining floor and trim. Those details affect how the door closes, how it feels in use and how tidy the final joinery looks.
External door work or altered openings should be assessed with the relevant installation requirements in mind, and any fire-performance needs should be considered where they apply. For a smaller alternative, a possible brief might be a like-for-like internal replacement with limited making good, rather than a more involved frame change.
Design checks
Four things we confirm before drawing door installation.
- 01Assess whether the existing frame can be retained.
- 02Check clearances, hardware and the adjoining finishes.
- 03Treat external doors and altered openings as a separate assessment.
- 04Confirm any fire-performance needs before ordering the door.
What is the main risk in reusing an old frame?
The risk is assuming it is sound and square when it may not be. If the frame is twisted or damaged, the new door can bind, leave uneven gaps or look unfinished, so the condition of the opening needs checking first.
Should hardware be chosen after the door type is fixed?
Yes, because the hardware needs to suit the door’s use and weight as well as the opening. Handles, latches and hinges are part of the performance of the door, not just finishing touches.
Can a door replacement stay local to one opening?
Often, yes, if the frame and surrounding finishes are suitable. The scope should show whether it is a simple like-for-like replacement or whether the opening needs adjustment, because those are different amounts of work.
Planning and project guidance
- Conservation areas - City of London
- GOV.UK · Planning permission
- GOV.UK · Building regulations approval
- GOV.UK · Party walls and building work
Check the current guidance for your address before relying on a planning route. This guide is not a planning decision or a verified local case study.
Other services in Barbican







