Surrey · Reigate · Town service guide
Dormer loft conversionin Reigate.
A dormer conversion is often chosen for the extra standing room it can create, but the external projection has to be justified as well. In Reigate, the design should balance headroom, roof proportions and the present planning position for the specific address before the stair, bathroom and room arrangement are fixed.

- Service
- Dormer loft conversion
- Town / city
- Reigate
- County
- Surrey
- Next step
- Discuss your project
Your project brief
Use headroom and stair position to shape the loft plan
Measure the existing ridge height and likely finished headroom so the layout is based on real clearance rather than an optimistic sketch. That helps you decide whether the dormer should support a bedroom, office or bathroom, and how much of the floor area is genuinely usable.
The stair opening below should be drawn at the same time as the loft plan. If the stair lands badly, it can reduce the usefulness of the room above or force a compromise in the floor below, so the two levels need to be developed together.
Reigate address check before you rely on a draft appraisal
Reigate and Banstead Borough Council notes that older conservation boundaries may not be current and points owners to the live heritage map. Its linked character appraisals are draft documents approved for consultation, so they should be used with care. For a dormer, that means confirming the address-based map result and recording whether any supporting material is draft or adopted before you rely on it.
Design decisions
Make the external projection earn its place
Review overlooking, external materials and the roof proportions before settling on the dormer size. A large projection may solve headroom but leave the house looking unbalanced, while a modest one may preserve the roof better but provide less flexibility inside.
Coordination matters as much as appearance. Insulation, ventilation, fire safety and structure all affect how the dormer works in practice, and those requirements should guide the design rather than being added later as separate technical fixes.
Design checks
Four things we confirm before drawing a dormer loft conversion.
- 01Measure ridge height and expected finished headroom.
- 02Show the new stair on the floor below as well as the loft plan.
- 03Review overlooking and roof proportions together.
- 04Coordinate structure, ventilation, insulation and fire safety early.
Questions
Before you call about Reigate.
Why does the stair need to be shown on the lower floor as well as the loft plan?
Because it affects both levels. The stair takes space from the floor below, changes the landing position and can influence where the dormer can sit above. Showing both plans together avoids a layout that looks workable in isolation but fails in practice.
How should I think about dormer size when planning the exterior?
Start with the headroom and room use you actually need, then test the dormer against the roof proportions. If the projection feels too dominant, the design may need adjusting so the house still reads as a coherent whole.
What technical issues should be discussed before quotes are compared?
Discuss the structural strategy, insulation build-up, ventilation approach and fire-safety requirements first. Those items shape the real cost and feasibility, so comparing prices without them can lead to misleading or incomplete quotations.
Planning and project guidance
- Reigate and Banstead · current conservation boundaries and appraisal status
- GOV.UK · Planning permission
- GOV.UK · Building regulations approval
- GOV.UK · Party walls and building work
Check the current guidance for your address before relying on a planning route. This guide is not a planning decision or a verified local case study.
Other services in Reigate








