Surrey · Reigate · Town service guide
Wraparound extensionin Reigate.
A wraparound extension only makes sense when the side and rear additions are designed as one scheme. In Reigate, that means thinking about the combined footprint, retained garden space and the way the new rooms will connect to the original house, instead of treating the two wings as separate pieces.

- Service
- Wraparound extension
- Town / city
- Reigate
- County
- Surrey
- Next step
- Discuss your project
Your project brief
Treat the side and rear additions as one footprint
Compare the combined footprint with the garden you intend to keep, because the balance between new floor area and outdoor space will shape the whole brief. A large scheme may improve the ground floor but leave awkward leftover space if the two wings are not planned together.
Photographs of the boundaries and a single measured plan help the designer understand how the extension will sit on the site. That is especially useful when the corners, roof junctions and access points all need to work as one coherent shape rather than as disconnected parts.
Reigate map check for a combined scheme
Reigate and Banstead Borough Council advises owners to use the live heritage map because older appraisal boundaries may not be current. For a wraparound extension, that address check is more reliable than a historic plan when judging how the combined side and rear form should be handled. If you refer to an appraisal for context, note whether it is draft or adopted and keep the scheme tied to the present map position.
Design decisions
Plan light, structure and service routes together
Daylight to the centre of the original house is often the key issue in a wraparound scheme. If the middle rooms are likely to become darker, the design may need rooflights, glazing changes or a different internal layout to keep the home comfortable.
The structural openings and roof junctions should be designed alongside drainage, heating and kitchen or utility services. That avoids a plan where the shell looks good but the day-to-day use is awkward because pipes, appliances or doors were left until later.
Design checks
Four things we confirm before drawing a wraparound extension.
- 01Measure the side and rear footprint as one combined scheme.
- 02Show how much garden remains after the extension.
- 03Plan daylight to the centre of the original house.
- 04Check the planning route for the combined proposal, not two separate assumptions.
Questions
Before you call about Reigate.
Why does a wraparound scheme need to be thought of as one extension rather than two?
Because the corners, roof junctions, circulation and light strategy all interact. If you design side and rear parts separately, the result can be awkward internally or visually fragmented outside, even if each part seems acceptable on its own.
How should garden space be weighed against internal floor area?
By deciding what kind of outdoor space you actually want to keep and how the home will be used. A smaller but better-shaped garden can be preferable to a larger leftover strip that does not work well with the house.
What service decisions matter most in a wraparound design?
Drainage routes, heating, kitchen services and any new openings should be considered early. Those choices affect where walls, doors and appliances can go, so they are part of the layout decision rather than a later technical detail.
Planning and project guidance
- Reigate and Banstead · current conservation boundaries and appraisal status
- GOV.UK · Planning permission
- GOV.UK · Building regulations approval
- GOV.UK · Party walls and building work
Check the current guidance for your address before relying on a planning route. This guide is not a planning decision or a verified local case study.
Other services in Reigate








