Surrey · Reigate · Town service guide
Mansard loft conversionin Reigate.
A mansard conversion changes the roof shape as well as the usable space below it, so the design has to answer both outside and inside questions. In Reigate, the best starting point is to compare the proposed profile with the existing roof, nearby roof forms and the current map for the specific address.

- Service
- Mansard loft conversion
- Town / city
- Reigate
- County
- Surrey
- Next step
- Discuss your project
Your project brief
Check the roofscape before you draw the new profile
Record the ridge height, adjoining roof profiles and chimney positions before deciding how steep the lower slope should be. Those features help show whether the new roof would sit comfortably within the wider setting or whether the proposal needs a more careful external treatment.
A mansard is not only a space-making exercise. The external break between the lower and upper slopes needs to be justified by the existing house form, the visual effect from the street and the way the proposal handles light, structure and weathering at the roof edge.
Reigate map check for a roof-shape change
Reigate and Banstead Borough Council warns that older appraisal boundaries may not reflect current areas, and its heritage mapping should be used for the address under review. A draft appraisal may still help explain historic character, but it should not be treated as adopted policy. For a mansard, that distinction matters because the roof profile is judged against the present planning position, not just a historic diagram.
Design decisions
Treat planning route and structure as part of the same decision
Confirm the likely application route before settling on the final roof shape, because the planning position can influence how far the design should go. If the scheme depends on a particular appearance, that should be tested early rather than revised after the layout has been drawn.
The internal arrangement also needs to work with the stair and structure. A mansard can create generous rooms, but only if the floor build-up, weatherproofing and stair position are coordinated from the beginning rather than solved separately at the end.
Design checks
Four things we confirm before drawing a mansard loft conversion.
- 01Record the ridge, chimneys and adjoining roof forms.
- 02Compare the new profile with the wider roofscape before fixing drawings.
- 03Confirm the application route before finalising the external form.
- 04Coordinate stair position, structure and weatherproofing together.
Questions
Before you call about Reigate.
How early should the external roof profile be settled on a mansard scheme?
Early enough that the structure and stair can respond to it. If the profile changes later, the headroom, drainage details and room layout may all need revisiting, which can weaken the design and add avoidable redesign work.
Why does the roofscape matter if the goal is extra internal space?
Because the external shape is part of the planning and design case. A mansard that ignores the surrounding roof rhythm can look forced, whereas a well-considered profile can make the added space easier to justify and to build.
What should be checked if the house has chimneys or other roof features?
Any chimney, party-wall condition or existing roof break should be recorded before the layout is fixed. These features can affect structure, weathering and room placement, so they should be shown clearly on the design information.
Planning and project guidance
- Reigate and Banstead · current conservation boundaries and appraisal status
- GOV.UK · Planning permission
- GOV.UK · Building regulations approval
- GOV.UK · Party walls and building work
Check the current guidance for your address before relying on a planning route. This guide is not a planning decision or a verified local case study.
Other services in Reigate








