Greenwich · South London
Hip-to-gable loft conversionin Greenwich.
A hip-to-gable loft conversion is often chosen when the existing hip limits usable loft space. The important decision is how the new vertical end changes the roof, the support needed at the side of the house, and the way the new floor sits over the rooms beneath.

- Service
- Hip-to-gable loft conversion
- Neighbourhood
- Greenwich
- Borough
- Greenwich
- Next step
- Discuss your project
Your project brief
Check the side roof before assuming extra space is available
Start with the existing hipped end and the side boundary, because the feasibility of this type of conversion depends on how much of that roof can be reworked. The new gable is not just an external change; it affects the internal floor shape and the way the loft joins the rest of the house.
You should also think about the room below the altered end. If the stair, storage or landing is located above a bedroom or study, the structure and services may need more careful arrangement. A good design makes that impact visible early rather than leaving it to site decisions.
Greenwich local checks for a hip-to-gable proposal
Greenwich council notes that planning permission is often needed for flats, maisonettes, listed buildings, conservation areas and homes with an Article 4 direction. That does not decide the case for every address, so the exact property must be checked. For a hip-to-gable scheme, the side elevation and the complete roof proposal should be considered together.
Design decisions
Use the roof change to improve the whole layout
The best hip-to-gable schemes are planned as whole-house adjustments. If the loft room is intended for sleeping, the position of doors, windows and the stair should help the floor below keep a sensible circulation route. That may mean changing the landing shape or relocating cupboards to make the home work better.
It is also worth reviewing whether a rear dormer belongs in the same proposal. If the two elements are designed together, the layout can be more balanced. If they are not, the new gable may still leave awkward headroom or a poor relationship with the rooms beneath.
Design checks
Four things we confirm before drawing a hip-to-gable loft conversion.
- 01Measure the existing hipped roof and the side boundary position.
- 02Assess how the new gable will be supported structurally.
- 03Compare the side elevation with neighbouring roof relationships.
- 04Review whether any rear dormer is part of the same overall design.
Questions
Before you call about Greenwich.
How does a hip-to-gable conversion affect the room below the altered roof end?
The changed roof line can alter where structure, stairs and services need to run. That may affect the room below in terms of ceiling work, sound transfer and the location of fixed features such as wardrobes or bathroom fittings.
What should be checked at handover for this kind of loft work?
Ask to review the stair, fire protection details, windows, ventilation, insulation interfaces and any accessible maintenance points. It is also sensible to confirm which compliance documents and completion steps are still outstanding.
Can I decide on the gable without looking at the rest of the roof?
It is better not to. The gable, any dormer, and the internal arrangement all influence one another. Looking at the side alone can lead to poor headroom, awkward access or an unbalanced design.
Planning and project guidance
- Find out if you need planning permission | Royal Borough of Greenwich
- GOV.UK · Planning permission
- GOV.UK · Building regulations approval
- GOV.UK · Party walls and building work
Check the current guidance for your address before relying on a planning route. This guide is not a planning decision or a verified local case study.
Other services in Greenwich








