Greenwich · South London
Wraparound extensionin Greenwich.
A wraparound extension is a bigger decision than adding a side wall or a rear projection on its own. It reshapes the ground floor as one combined scheme, so you need to think about the rooms behind the addition, daylight to the centre of the house and how the whole structure will work together.

- Service
- Wraparound extension
- Neighbourhood
- Greenwich
- Borough
- Greenwich
- Next step
- Discuss your project
Your project brief
Treat the side and rear as one design problem
The advantage of a wraparound scheme is that it can redraw the ground floor more completely, but that only works if the side and rear elements are planned together. Compare the proposed footprint with the garden you want to keep, then look at how the new walls change the room behind the original house.
If the work removes a narrow kitchen and replaces it with a larger living space, the next question is how light reaches the middle of the plan. A successful design often depends on rooflights, glazing or an internal opening strategy, not just on building more floor area.
Greenwich planning checks for a combined extension
Greenwich council says homeowners should find out whether planning permission is needed before starting work, and it points to building control where structural changes are involved. Because a wraparound combines two parts into one proposal, the planning route should be checked for the whole scheme rather than assuming separate allowances apply. Exact-address verification remains essential.
Design decisions
Understand what changes for the rooms behind the addition
A wraparound can transform the room behind the extension, but it can also make it darker or shift circulation in an awkward way. That is why the impact on the existing rear rooms should be assessed before the layout is fixed. You may need to widen an opening, alter the kitchen run or relocate a utility zone to keep the house usable.
Structural openings and roof junctions also need careful coordination. If the side and rear parts meet badly, the result can be extra bulk or a compromised interior. A possible brief might keep the rear living area open while using the side portion for storage or services, but that choice should come from the plan, not from guesswork.
Design checks
Four things we confirm before drawing a wraparound extension.
- 01Compare the combined side and rear footprint with the garden retained.
- 02Plan how daylight will reach the centre of the original house.
- 03Coordinate structural openings and the junction between roof elements.
- 04Check the planning route for the full scheme, not two separate pieces.
Questions
Before you call about Greenwich.
What should I ask about the rooms behind a wraparound extension?
Ask how the light, circulation and wall positions will change in the rooms that remain after the build. If those rooms become darker or more enclosed, the design may need more glazing or a different internal arrangement.
What final checks make sense when the work is handed over?
Review the finishes, openings, roof junctions, ventilation, heating controls and any visible service points, and ask which inspections or certificates are still to come. Handover checks should confirm practical completion, not replace formal sign-off.
Is a wraparound just a side extension plus a rear extension?
Not really. It is one joined-up design with shared structural and planning decisions. Treating it as two separate jobs can miss the effect on daylight, circulation and the retained garden space.
Planning and project guidance
- Find out if you need planning permission | Royal Borough of Greenwich
- GOV.UK · Planning permission
- GOV.UK · Building regulations approval
- GOV.UK · Party walls and building work
Check the current guidance for your address before relying on a planning route. This guide is not a planning decision or a verified local case study.
Other services in Greenwich








