Greenwich · South London
Hip-to-gable loft conversionin Eltham.
A hip-to-gable conversion is best treated as a sequence of decisions, not a single shape change. First confirm the roof geometry and side constraints, then test how the new structure can support the extra space, and only then settle the room arrangement.

- Service
- Hip-to-gable loft conversion
- Neighbourhood
- Eltham
- Borough
- Greenwich
- Next step
- Discuss your project
Your project brief
Start with the hipped roof and the side edge of the site
The first question is how much of the existing hip can be replaced and what sits beside it. The side boundary matters because the new gable needs enough room to read properly and enough structural support to work with the existing house rather than against it.
If the family brief is deliberately flexible, the plan should stay simple at this stage. For example, a possible brief might be a room that could serve as a teenager’s bedroom now and a guest room later; that works better when the floor plate is kept open and the access is straightforward.
Eltham address checks for roof changes
Greenwich’s planning advice says to check permission before starting work and to treat flats, listed buildings, conservation areas and Article 4 locations with particular care. For a hip-to-gable proposal in Eltham, the exact address needs checking because borough guidance alone does not prove what applies to your street or plot.
Design decisions
Coordinate support, dormer choice and the new internal use
The roof support cannot be decided after the room layout, because the new gable changes how loads travel through the building. It is also sensible to consider whether a rear dormer forms part of the same scheme, since that affects headroom, window position and the proportions of the finished room.
Once those matters are understood, the internal arrangement can be restrained and practical. Keep doors, storage and any bathroom in positions that do not pinch the centre of the space. That way the conversion earns its keep as a genuinely usable room rather than a shaped box around structural compromises.
Design checks
Four things we confirm before drawing a hip-to-gable loft conversion.
- 01Record the existing hip and the side boundary before drawing a new gable.
- 02Assess how the new structure will be supported before deciding the room plan.
- 03Compare the side elevation with nearby roof relationships as one design decision.
- 04Check whether a rear dormer belongs within the same overall proposal.
Questions
Before you call about Eltham.
Why does the side boundary matter so much on this type of conversion?
Because the new gable replaces part of the sloping roof edge and needs enough space to work visually and structurally. The boundary also helps shape how the side elevation will be read from outside.
Should a rear dormer be planned separately?
Usually not at the early stage. If a dormer is being considered, it should be tested as part of the same overall roof proposal so the structure, headroom and external appearance are judged together.
How can the layout stay flexible for a changing family use?
Keep the room shape as open as possible and avoid overbuilding partitions. A simple, well-placed stair and storage arrangement makes it easier for the space to change function later without redesigning the whole floor.
Planning and project guidance
- Find out if you need planning permission | Royal Borough of Greenwich
- GOV.UK · Planning permission
- GOV.UK · Building regulations approval
- GOV.UK · Party walls and building work
Check the current guidance for your address before relying on a planning route. This guide is not a planning decision or a verified local case study.
Other services in Eltham








