Greenwich · South London
L-shape loft conversionin Eltham.
An L-shape loft conversion only works smoothly when the design decisions are made in the right order. Start with what the roof can actually give you, then test how the new room, stair and bathroom can fit without forcing late changes.

- Service
- L-shape loft conversion
- Neighbourhood
- Eltham
- Borough
- Greenwich
- Next step
- Discuss your project
Your project brief
Measure the two roof areas before you sketch the room
With an L-shape conversion, the main roof and the rear addition need to be measured separately because each part may offer different headroom, usable width and floor level. If those figures are mixed together too early, the layout can look better on paper than it will in practice.
That first survey should also show where the two roof spaces meet, because the junction often affects how much usable floor you really gain. A sensible brief might be a family room that can later become a bedroom, but that only stays flexible if the roof shape supports the same simple circulation in both uses.
Eltham checks before you fix the scheme
For Eltham projects, use the Greenwich planning starting point to check whether your property needs permission before work begins. The council guidance says some homes can proceed under permitted development, but flats, listed buildings, conservation areas and places with an Article 4 direction usually need closer checking. That is why the exact address matters: borough-wide information is not enough to decide your site position.
Design decisions
Fix the stair, bathroom and structure before choosing finishes
The stair location should be decided alongside the structural opening, not afterwards. If the stairs land awkwardly, you can lose the very floor area you hoped to create. The same applies to bathroom drainage, which may influence where the wet room can sit without running complex pipework across the new floor.
Once those constraints are clear, the structural design and roof build-up can be set, followed by insulation, ventilation and fire-safety details. Finishes come last because a restrained layout is often the better family choice: one generous room, a practical landing and storage where it does not interrupt movement.
Design checks
Four things we confirm before drawing an L-shape loft conversion.
- 01Measure the main roof and rear addition separately before fixing the layout.
- 02Compare floor levels, headroom and the roof junction in one survey.
- 03Decide where the stair and bathroom services will go before drawing room furniture.
- 04Check the whole proposed volume and planning route together, not as separate assumptions.
Questions
Before you call about Eltham.
How does an L-shape layout help a room stay flexible as family needs change?
It can create a larger, simpler floor plate that works for a bedroom, play room or study area. The key is keeping the circulation easy and avoiding awkward corners that only suit one fixed use.
Why should the stair position be decided so early?
Because the stair affects headroom, landing size and the shape of the floor below. If it is added late, it can force a cramped corridor or reduce the useful area in the room you are trying to create.
What should be checked before choosing internal finishes?
The structure, services and roof build-up should already be settled. That way, the ceiling lines, skirtings, doors and storage can be chosen to suit the real room shape rather than covering over unresolved design problems.
Planning and project guidance
- Find out if you need planning permission | Royal Borough of Greenwich
- GOV.UK · Planning permission
- GOV.UK · Building regulations approval
- GOV.UK · Party walls and building work
Check the current guidance for your address before relying on a planning route. This guide is not a planning decision or a verified local case study.
Other services in Eltham








